Jaycee's Networking

June 26, 2009

JUNOS Commands for IOS Users

Filed under: IOS, Junos — Tags: , — Jaycee @ 11:15 pm

A. Basic CLI and Systems Management Commands:

IOS Command JUNOS Command
clock set set date
reload request system reboot
send request message
show clock show system uptime
show environment show chassis environment
show history show cli history
show ip traffic show system statistics
show logging show log
show log file name
show processes show system processes
show running config show configuration
show tech-support request support information
show users show system users
show version show version
show chassis hardware
terminal length set cli screen-length
terminal width set cli screen-width
trace traceroute

B. Switching Commands:

IOS Command JUNOS Command
none show ethernet-switching interfaces
show spanning-tree show spanning-tree bridge
show mac address-table show ethernet-switching table

C. Interface Commands:

IOS Command JUNOS Command
clear counters clear interface statistics
show interfaces show interfaces
show interfaces detail
show interfaces extensive
show ip interface brief show interfaces terse

D. Routing Protocol-Independent Commands:

IOS Command JUNOS Command
clear arp-cache clear arp
show arp show arp
show ip route show route
show ip route summary show route summary
show route-map show policy
show policy policy-name
show tcp show system connections

1. OSPF Commands:

IOS Command JUNOS Command
show ip ospf database show ospf database
show ip ospf interface show ospf interface
show ip ospf neighbor show ospf neighbor

2. BGP Commands:

IOS Command JUNOS Command
clear ip bgp clear bgp neighbor
clear ip bgp dampening clear bgp damping
show ip bgp show route protocol bgp
show ip bgp community show route community
show ip bgp dampened paths show route damping decayed
show ip bgp neighbors show bgp neighbor
show ip bgp neighbors address advertised-routes show route advertising-protocol bgp address
show ip bgp neighbors address received-routes show route receive-protocol bgp address
show ip bgp peer-group show bgp group
show ip bgp regexp show route aspath-regex
show ip bgp summary show bgp summary

7 Comments »

  1. Thanks for making such a valuable blog, sincerely Kobos Mathers.

    Gucci Shoes

    Comment by guccishoes — May 26, 2010 @ 9:25 am

  2. Thanks a lot.

    Comment by vjineo — June 9, 2010 @ 11:26 pm

  3. Thanks, where i can find all UNOS Commands for IOS Users

    BR

    Comment by Marwan-Egypt — February 7, 2011 @ 6:36 am

    • There are books about Junos including some Junos/IOS command comparison.
      Or, you can go to Juniper website, there is a online learning section for IOS users.

      Comment by Jaycee — February 7, 2011 @ 9:04 am

  4. my junos box doesn’t allow show ethernet-switching table. Am I missing something. I am actually trying to use this command to find out if there are any interfaces operating at half-duplex. Sh interfaces | find Half-Duplex but it won’t show the IP address, on the mac.How do I make a nice list of interfaces operating at Half-Duplex? Thanks!

    Comment by Matt — October 18, 2011 @ 6:22 am

    • yup… need “show int terse” to match the interface you want.
      I dont know any single command can pull the list out either.

      show int terse | match ge-0/0/0

      Comment by Jaycee — October 18, 2011 @ 10:33 am

  5. Wow, this is a helpful website.

    Comment by More Info — August 17, 2013 @ 10:26 pm


RSS feed for comments on this post. TrackBack URI

Leave a reply to Marwan-Egypt Cancel reply

Create a free website or blog at WordPress.com.